You may recall a couple of years ago (sheesh!) I was posting ‘fieldcraft‘ articles pretty frequently. Well, the intervening year had me busy doing the King’s work, but now I’m back in the field and thus, a new fieldcraft post.
It was highly recommended to me by my commander that I develop a “planning board.” You may recall my post on building a plexiglass map board. It’s kind of like that, but a little more involved.
The purpose of the board is to provide the leader with a tool in the field for planning a mission. It is highly customizable, and I based mine off of my commander’s, though I added things that I thought I would find useful.
My board is made out of four pieces of 8 1/2″ x 10″ plexiglass (from Lowe’s Hardware), copious amounts of 100 MPH tape, some transparency sheets, dry erase markers, binder clips, plain pieces of white paper, excerpts from the Infantry Leader Card GTA, and an execution matrix that I created.
This isn’t hard or expensive to build. It just takes a little time.
After building the thing, I wasn’t really sure how useful it would be. I brought it with me to NTC, and I can confidently report that it was a great tool. Most useful was the blank space in which I could draw out simple COA sketches and the execution matrix which pretty much ran my scheme of maneuver. Often I had simple graphics that I could use for a given mission which helped me on the ground (yes, I brought this thing with me on missions).
This is definitely something I’ll take with me on deployment. I’d like to refine it, though. I actually didn’t use a lot of the weapons data – so I might modify what I put on that front piece – maybe planning info? I’d also like to find a way to stow this thing on my gear without needing an assault pack. I’m not sure what that would be – maybe a D-ring attached to it? I don’t know.
Anyway. It’s a good tool and I’m happy to share it with you.
1. Tape the edges of the plexiglass first.
2. Use a piece of 100 MPH tape to connect the pieces of plexiglass together, ensuring you leave enough space so that it will close on itself.
3. With the fourth piece of plexiglass, tape it to the top (or bottom) of the middle piece so that you have the ability to insert a map or graphics. You can also place extra pieces of transparency paper inside of this space to keep until you need to use it. Use a binder clip to keep it closed.
4. Place a piece of white paper on one of the boards and tape it down, and then place a piece of transparency paper over it and tape that down – this provides you a space to write/draw on.
5. Use one side to tape down relevant data – I chose weapon system information, engagement area development, and call for fire information.
6. On the backside, tape in a pouch to store markers, protractors, and whatever else you want to store.